Construction:
Backing: PET film
Reinforcement: Glass yarn
Adhesive: Pressure Sensitive
Typical Physical Properties: Item Test result Testing method(ASTM)
Total thickness: 0.13mm D 3652
Initial Ashesion: 9# D 3121
Peel adhesion at 180° (SUS): 35N/25mm D 3330
Tensile Strength: 500 N/25mm D 3759
Holding Power: ＞72h D 3654
Elongation: 5% D 3759
Note: Typical data for reference, not for specification purpose.
Little knowledge for tape application
- The laminated adhesion depends on the contact area therefore a proper pressure & time helps
improve the adhesion strength.
-The substrates should be clean without oil, clean using solvents when necessary.
-The best laminate temperature is room temperature , it becomes hard when temperature approach
0℃ as the adhesive film becomes firm.
